IKEA RENLIGFWM User Manual download pdf (Page 12)

• Pour the liquid detergent in the com-

partment

without exceeding the limit

indicated in the flap. The detergent

must be placed in the appropriate com-

partments of the dispenser drawer be-

fore starting the wash programme.

Warning! Do not use the flap in

"DOWN" position with:

• Gelatinous detergent or thick deter-

gent.

• Powder detergent.

• With programmes with prewash.

• Do not use liquid detergent if the wash-

ing programme doesn't start immedi-

ately.

In all above listed cases, use the flap

in "UP" position .

Pour fabric softener

or any additives in-

to the compartment

marked

(do not

exceed the «MAX»

mark in the draw-

er). Any additives

must be placed in

the appropriate

compartments of

the dispenser draw-

er just before start-

ing the wash pro-

gramme.

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 4 starts to blink.

At the end of the programme the selector

dial must be turned to position O, to switch

the appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 4 will blink 3 times

to indicate a wrong selection. The

appliance will not perform the new selected

programme.

Select the available options by pressing

buttons 5, 6 and 7

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button 4

flashes for 3 times.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button

2

Before you start the programme, if you wish

to delay the start, press the button 2 re-

peatedly, to select the desired delay. The

relevant light illuminates.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 4.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the

button 2.

3. Press button 4:

– the appliance starts its countdown.

– The programme will start after the

selected delay has expired.

ENGLISH 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Comments to this Manuals

No comments