IKEA RENLIGFWM User Manual download pdf (Page 11)

• Measure out the detergent.

For the quantity of detergent, refer al-

ways to what is written on the product

packing and ensure that the detergent can

be poured in the drawer.

• Pour the liquid detergent in the compart-

ment

without exceeding the limit indi-

cated in the flap. The detergent must be

placed in the appropriate compartments

of the dispenser drawer before starting

the wash programme.

Warning! Do not use the flap in

"DOWN" position with:

• Gelatinous detergent or thick detergent.

• Powder detergent.

• With programmes with prewash.

• Do not use liquid detergent if the wash-

ing programme doesn't start immediate-

ly.

In all above listed cases, use the flap

in "UP" position .

Pour fabric softener

or any additives into

the compartment

marked

(do not

exceed the «MAX»

mark in the drawer).

Any additives must

be placed in the ap-

propriate compart-

ments of the dis-

penser drawer just

before starting the

wash programme.

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 5 starts to blink.

At the end of the programme the selector di-

al must be turned to position O, to switch the

appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 5 will blink 3 times to

indicate a wrong selection. The appliance

will not perform the new selected

programme.

Select the available options by pressing

buttons 2, 3 and 4

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the programme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button 5

flashes for 3 times.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button 6

Before you start the programme, if you wish

to delay the start, press the button 6 repeat-

edly, to select the desired delay. The relevant

light illuminates.

You must select this option after you have set

the programme and before you start the pro-

gramme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the but-

ton 6.

3. Press button 5:

– the appliance starts its countdown.

– The programme will start after the se-

lected delay has expired.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments