IKEA LOV3 User Manual download pdf (Page 14)

When the cleaning is completed, install the

glass panel and the oven door. Do the

above steps in the opposite sequence.

The screen-printing zone must face the

inner side of the door. Make sure that after

the installation the surface of the glass

panel frame on the screen-printing zones is

not rough when you touch it.

Make sure that you install the internal glass

panel in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

Warning! Danger of

electrocution! Disconnect the fuse

before you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

3. Turn the lamp glass cover

counterclockwise to remove it.

4. Clean the glass cover.

5. Replace the oven light bulb with a 25

W, 230 V (50 Hz), 300 °C heat resistant

oven light bulb (connection type: E14).

6. Install the glass cover.

Troubleshooting

Warning! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

ENGLISH 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

IKEA LOV3 User Manual Page 14