IKEA LOV3 User Manual download pdf (Page 9)

Inserting the door and the glass panel

When the cleaning procedure is completed,

insert the glass panel and the oven door. To

do so, follow the steps in reverse.

The inner glass panel must be assembled

keeping the decorative frame (screen-print-

ing) turned towards outside of the oven. To

double check you did the above operation in

a proper way simply pass your fingers on the

inner glass surface. If the panel of glass is as-

sembled correctly you should not feel any

roughness.

Insert the internal panel of glass into the right

seats as shown below.

Changing the oven lamp and cleaning the

glass cover

Warning! Before you change the oven

lamp (refer to "Product description"),

switch off the appliance and disconnect it from

the electrical supply.

1. Turn the glass cover anti - clockwise and

remove it. Clean the glass cover.

2. If necessary, replace the old oven lamp

with a 15/25 watt, 230V (50Hz), 300 °C

heat resistant oven lamp (Connection type:

E14).

3. Refit the glass cover.

What to do if…

Problem Possible cause Solution

The oven does not op-

erate

The required setting have not

been set

check if cooking function and tem-

perature are selected

The oven does not op-

erate

The appliance is not correctly

connected and the mains supply

to the oven is not on

Check if the appliance is correctly

connected and the mains supply

to the oven is on

The temperature indica-

tor does not come on

The required setting have not

been set

Select the cooking function and

temperature

The oven lamp is not

working

The oven lamp bulb is faulty Replace the oven lamp bulb

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments