IKEA LOV3 User Manual download pdf (Page 11)

Number of functions 3

Energy consumption 0,79 kWh

Energy Consumption with a standard

load and bottom heating

0,79 kWh

1) Information on the electrical connection, voltage and overall power is given on the rating plate (refer to "Product

description").

Installation

Caution! Refer to the assembly

instructions for the installation.

Warning! Only a qualified and

competent person must do the

installation of the appliance. If you do not

contact qualified or competent person, the

guarantee becomes invalid if there is

damage.

• Before you built in the appliance to the

kitchen cabinet make sure that the recess

dimensions are suitable.

• Make sure that there is anti-shock protec-

tion for the installation.

• According to the regulations of force, all

parts which ensure the anti-shock protec-

tion must be fixed in such a way that they

cannot be undone without tools.

• The appliance can be placed with its back

and one side close to the higher applian-

ces or walls. The other side must be placed

close to the furniture with the same height.

• The built-in unit must meet the stability re-

quirements of DIN 68930.

• Built-in ovens and built-in cooking surfaces

are fitted with special connection systems.

For safety reasons, you must only combine

appliances from the same manufacturer.

Electrical connection

Warning! Only a qualified electrician

and competent person must do the

electrical installation.

• The manufacturer is not responsible if you

do not follow these safety precautions.

• Ground the appliance according to safety

precautions.

• Make sure that the rated voltage and type

of power on the rating plate agree with

the voltage and the power of the local

power supply.

• This appliance is supplied with a mains ca-

ble without plug.

• The yellow-green earth wire should be 2-3

cm longer than all other cables.

• Any electrical component must be installed

or replaced by the After Sales Service

technician or qualified service personnel.

• Always use a correctly installed shockproof

socket.

• Do not use multi-way plugs, connectors

and extension cables. There is a risk of fire.

• Make sure that the mains plug is accessible

after installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Connect the appliance to the mains using a

device that allows to disconnect the appli-

ance from the mains at all poles with a

contact opening width of at least 3 mm, eg.

automatic line protecting cut-out, earth

leakage trips or fuse.

This appliance complies with the E.E.C. Direc-

tives.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments