IKEA LAGAN User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
2. Set the water softener to the highest lev-
el.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Reset function
For some settings it is necessary that the
appliance is in user mode.
The appliance is in user mode when all the
programme indicators are on and the end
indicator is flashing.
To set the appliance in user mode, do the
Reset function.
1. Press and hold Program until all the
programme indicators come on and the
end indicator flashes.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Press Program again and again until
only the indicator of the programme you
want to set is on.
4. Close the appliance door. The pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
At the end of the programme
When the programme is completed, the
end indicator is on.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily dam-
aged.
First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides and
on the door of the appliance. Stain-
less steel becomes cool more quickly
than the dishes.
Hints and tips
The water softener
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soften-
er clean and in good conditions. It is impor-
tant to set the right level of the water soft-
ener. This makes sure that the water soften-
er uses the correct quantity of dishwasher
salt and water.
Loading the baskets
Refer to the supplied leaflet with ex-
amples of the load of the baskets.
Only use the appliance to wash items
that are dishwasher-safe.
Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
Do not put in the appliance items that
can absorb water (sponges, household
cloths).
Remove remaining food from the items.
ENGLISH 11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Comments to this Manuals

No comments