IKEA LAGAN User Manual download pdf (Page 10)

How to set programme selection mode

The appliance is in programme selection

mode when the programme indicator

is blinking.

After activation, the appliance is in

programme selection mode by default. If

not, set programme selection mode the

following way:

Press and hold the programme button until

the appliance is in programme selection

mode.

Acoustic signals

Acoustic signals sound when a malfunction

of the appliance occurs. It is not possible to

deactivate these acoustic signals.

There is also an acoustic signal that sounds

when the programme is complete. This

acoustic signal is activated by default and

you can deactivate it.

How to deactivate the acoustic signal for

the end of programme

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

the programme button until the

indicator flashes and the indicators

and are on.

2. Wait until the indicators and

are off. The indicator still flashes.

The indicator shows the current setting:

• is on = the acoustic signal is on.

3. Press the programme button to change

the setting.

• is off = the acoustic signal is off.

4. Press the on/off button to confirm the

setting.

Daily use

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in

programme selection mode.

• If the rinse aid indicator is on, fill the

rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for

the type of load and the degree of soil.

Using the detergent

1 2

ENGLISH 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments