IKEA LAGAN User Manual download pdf (Page 9)

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings can

be changed:

• The activation or the deactivation of the

acoustic signal for end of programme.

These settings will be saved until you

change them again.

How to set the programme selection mode

The appliance is in programme selection

mode when all the programme indicators

are on.

When you activate the appliance, usually it

is in programme selection mode. However,

if this does not happen, you can set the

programme selection mode in the following

way:

Press and hold the programme button until

the appliance is in programme selection

mode.

Acoustic signals

The acoustic signals operate when the

appliance has a malfunction and it is not

possible to deactivate them.

There is also an acoustic signal that

operates when the programme is

completed. By default, this acoustic signal is

on, but it is possible to deactivate it.

How to deactivate the acoustic signal for

the end of programme

The appliance must be in programme

selection mode.

1. To enter the setting mode, press and

hold the programme button until the

indicator starts to flash.

• The end indicator indicates the

current setting: End indicator on =

Acoustic signal on.

2. Press the programme button to change

the setting.

• End indicator off = Acoustic signal

off.

3. Press the on/off button confirm the

setting.

Before first use

1. Fill the rinse aid dispenser.

2. Open the water tap.

3. Start a program to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments