IKEA LAGAN User Manual download pdf (Page 11)

3

A

Put the detergent or

the multi-tablet in

compartment (A).

4

B

If the programme

has a prewash

phase, put a small

quantity of

detergent in

compartment (B).

5

When you use multi-tablets, that contain

rinse aid is not necessary to fill the rinse aid

dispenser.

• Set the rinse aid dispenser to the lowest

position.

What to do if you want to stop using multi-

tablets

Before you start to use detergent and rinse

aid separately do the following procedure.

1. Make sure that the rinse aid container is

full.

2. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

3. When the programme is completed,

adjust the released quantity of rinse aid.

Setting and starting a programme

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press the programme button repeatedly

until the indicator of the programme you

want to select comes on.

4. Close the appliance door to start the

programme.

Opening the door while the appliance

operates

If you open the door while a programme is

running, the appliance stops. When you

close the door, the appliance continues from

the point of interruption.

Cancelling the programme

Press and hold the programme button until

the appliance is in programme selection

mode.

Make sure that there is detergent in the

detergent dispenser before you start a new

programme.

End of the programme

When the programme is completed the

indicator is on.

1. Press the on/off button to deactivate the

appliance.

2. Close the water tap.

If you do not deactivate the

appliance within 5 minutes all

indicators goes off. This helps to

decrease energy consumption.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments