IKEA RENLIGFWM User Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
Problem Possible cause Solution
There is
water on
the floor:
Too much detergent or unsuitable de-
tergent (creates too much foam) has
been used.
Reduce the detergent quantity or use
another one.
Check whether there are any leaks
from one of the inlet hose fittings. It is
not always easy to see this as the wa-
ter runs down the hose; check if it is
damp.
Check the water inlet hose connection.
The drain or inlet hose is damaged. Replace it with a new one (check with
the Authorised Service Centre the
right spare part number).
The filter has not been properly
screwed in after cleaning action.
Screw the filter fully in.
The door
does not
open:
The programme is still running. Wait the end of washing cycle.
The door lock has not been released. Wait a few minutes before opening
the door.
There is water in the drum. Select drain or spin programme to
empty out the water.
The ap-
pliance
produces
an un-
usual
noise:
The transit bolts and packing have not
been removed.
Check the correct installation of the
appliance.
The support feet have not been adjus-
ted.
Check the correct levelling of the ap-
pliance.
The drain filter could be blocked. Check the drain filter. (See "Cleaning
the drain filter" for more details).
Unsatis-
factory
washing
results:
Too little detergent or unsuitable de-
tergent has been used.
Increase the detergent quantity or use
another one.
Stubborn stains have not been treated
prior to washing.
Use commercial products to treat the
stubborn stains.
The correct temperature was not selec-
ted.
Check if you have selected the correct
temperature.
Excessive laundry load. Reduce the laundry load in according
to the washing programmes table.
ENGLISH 32
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments