IKEA RENLIGFWM User Manual download pdf (Page 14)

Pour fabric softener

into the compartment

marked (must not

exceed the «MAX»

mark in the drawer).

Close the drawer gently

Select the required programme by turning

the programme selector dial

The appliance is now switched on. The

indicator of button starts to flash.

At the end of the programme the selector

dial must be turned to position , to switch

the appliance off.

For the description of each wash

cycle, the compatibility among

the washing programmes and

the options, consult the chapter

«Programmes».

Warning! If you turn the

programme selector dial to

another programme when the

appliance is working, the red

indicator of button will flash 3

times and the message

appears on the display to

indicate a wrong selection. The

appliance will not perform the

new selected programme.

Reduce the spin speed by pressing button

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant

indicator illuminates.

Select the available options by pressing

buttons and

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired

programme and before starting the

programme.

When these buttons are pressed, the

corresponding indicators illuminate. When

they are pressed again, the indicators go

out.

If an incorrect option is selected, the

integrated red indicator of the button

flashes 3 times and the message Err

appears on the display.

For the compatibility among the

washing programmes and the

options see chapter

«Programmes».

Select the Delay Start by pressing button

Before you start the programme, if you wish

to delay the start, press button

repeatedly, to select the desired delay.

The selected delay time value will appear

on the display for a few seconds, then the

duration of the programme will appear

again.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button .

ENGLISH 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments