Display
The display shows the following information:
A) Child safety lock.
This device permits you to leave the appliance unattended dur-
ing it's functioning.
B) This area shows the following info:
• Duration of the selected programme.
After selecting a programme, the duration is displayed in
hours and minutes (e. g. 2.05). The duration is calculated au-
tomatically on the basis of the maximum recommended load
for each type of fabric. After the programme has started, the
time remaining is updated every minute.
• Selected drying time.
After selecting a drying programme the drying time is shown
in minutes or hours and minutes. After the programme has
started, the time remaining is updated every minute.
• Delayed start.
The selected delay set by pressing the relevant button ap-
pears on the display for a few seconds, then the duration of
the selected programme is displayed again. The delay time
value decreases by one unit every hour and then, when 1
hour remains, every minute.
• Alarm codes.
In the event of operating problems, some alarm codes can
be displayed, e.g. E20 (for more details, please refer to
chapter «Troubleshooting»).
• Incorrect option selection.
If an option which is not compatible with the set wash pro-
gramme is selected, the message Err is displayed for a few
seconds and the red indicator of button
starts flashing.
• End of programme.
When the programme has finished the flashing zero ( 0) is
displayed, the indicator and the indicator of button go
out and the door can be opened.
Delay Start button The programme can be delayed from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 20 hours by means of
this button.
Start/Pause button This button allows you to start or to interrupt the selected washing
programme.
ENGLISH 11
Comments to this Manuals