IKEA LAGAN User Manual download pdf (Page 18)

Problem Possible cause Solution

The compressor operates

continually.

The door is not closed cor-

rectly.

Refer to "Closing the door".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

There is too much frost and

ice.

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

There is too much frost and

ice.

Food products are not

wrapped properly.

Wrap the food products bet-

ter.

There is too much frost and

ice.

Temperature is set incor-

rectly.

Refer to "Operation" chapter.

Water flows on the rear

plate of the refrigerator.

During the automatic de-

frosting process, frost melts

on the rear plate.

This is correct.

Water flows inside the re-

frigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Water flows inside the re-

frigerator.

Food products prevent

water from flowing into the

water collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the evap-

orative tray above the

compressor.

Attach the melting water outlet

to the evaporative tray.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The temperature in the ap-

pliance is too low/too high.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The temperature in the ap-

pliance is too low/too high.

The food products temper-

ature is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

The temperature in the ap-

pliance is too low/too high.

Many food products were

inserted at the same time.

Insert less food products at the

same time.

The temperature in the ap-

pliance is too low/too high.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

ENGLISH 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments