IKEA LAGAN User Manual download pdf (Page 12)

• The indicators and are on.

• The indicator flashes.

3. Wait until the indicators

and are

off. The indicator still flashes.

• The indicator shows the current

setting: off = AutoOpen is

deactivated.

4. Press the programme button to change

the setting.

• on = AutoOpen is activated .

5. Press on/off to confirm the setting.

Before first use

1. Make sure that the current level of the

water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

After starting a programme, it

may take up to 5 minutes for the

appliance to recharge the resin

in the water softener. It seems

that the appliance is not working.

The washing phase starts only

after this procedure is completed.

The procedure is repeated

periodically.

The salt container

Caution! Use rough salt

designed for dishwashers only.

Fine salt increases the risk of

corrosion.

The salt is used to recharge the resin in the

water softener and to assure good washing

results in daily use.

Filling the salt container

1 2

3

Put 1 litre of water

in the salt container

(only for the first

time).

4

Put 1 kg of salt in

the salt container.

ENGLISH 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments