IKEA LAGAN User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
Troubleshooting
If the appliance does not start or it stops
during operation, before you contact an
Authorised Service Centre, check if you can
solve the problem by yourself with the help
of the information in the table.
Warning! Repairs not properly
done may result in serious risk to
the safety of the user. Any
repairs must be performed by
qualified personnel.
With some problems the end indicator
flashes intermittently indicating a
malfunction.
The majority of problems that can occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code Possible cause and solution
You cannot activate the appliance.
Make sure that the mains plug is connected to
the mains socket.
Make sure that there is no damaged fuse in
the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
The appliance has started the procedure to re-
charge the resin inside the water softener. The
duration of the procedure is approximately 5
minutes.
The appliance does not fill with water.
The end indicator flashes 1 time in-
termittently.
Acoustic signal sounds 1 time inter-
mittently.
Make sure that the water tap is open.
Make sure that the pressure of the water sup-
ply is not too low. For this information, contact
your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain the wa-
ter.
The end indicator flashes 2 times
intermittently.
Acoustic signal sounds 2 times in-
termittently.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
ENGLISH 18
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments