IKEA LAGAN User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
ance is in setting mode. Refer to ’SET-
TING AND STARTING A PROGRAMME’.
If the salt indicator is on, fill the salt
container.
3. Make sure that there is rinse aid in the
rinse aid dispenser.
4. Load the baskets.
5. Add the detergent.
6. Set and start the correct programme for
the type of load and the degree of soil.
Using the detergent
1
2
3
A A
Put the detergent or the tablet in the com-
partment (A).
4
B
If the programme
has a prewash
phase, put a small
quantity of deter-
gent in compart-
ment (B).
5
Using the combi detergent tablets
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
the rinse aid dispenser. The rinse aid indi-
cator always comes on if the rinse aid dis-
penser is empty.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the lowest
position.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest lev-
el.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when, af-
ter the activation, all the programme indi-
cators are on.
If the control panel does not show this con-
dition press and hold the programme but-
ton until all the programme indicators come
on
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. Press Program again and again until
only the indicator of the programme you
want to set is on.
4. Close the appliance door. The pro-
gramme starts.
ENGLISH 10
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments