IKEA LAGAN User Manual

LAGANGB

5AFill the rinse aid dis-penser when thelens (A) is clear.6To adjust the re-leased quantity ofrinse aid, turn theselector betweenposition 1 (lowestqua

2. Set the water softener to the highest lev-el.3. Make sure that the salt container andthe rinse aid dispenser are full.4. Start the shortest program

• To remove easily remaining burned food,soak pots and pans in water before youput them in the appliance.• Put hollow items (cups, glasses and pans)wi

312To remove filters (B)and (C), turn thehandle counter-clockwise and re-move. Pull apart fil-ter (B) and (C).Wash the filters withwater.4ARemove filt

Alarm code Problem• The indicator of the set programme flash-es continuously.• The end indicator flashes 1 time intermit-tently.The appliance does not

Problem Possible cause Possible solutionThe salt indicator con-tinues to stay on afterthe replenishment ofthe salt container.This can occur when you a

Environment concernsThe symbol on the product or on itspackaging indicates that this product maynot be treated as household waste. Insteadit should

• Deliberate or negligent damage, dam-age caused by failure to observe operat-ing instructions, incorrect installation or byconnection to the wrong vo

– connections to electricity (if machinecomes without plug and cable), towater and to gas since they have tobe executed by an authorized serv-ice engi

Country Phone number Call Fee Opening timeBelgië 070 246016 Binnenlandse gesprekskosten 8 tot 20 Weekdagen Belgique Tarif des appels nationaux

© Inter IKEA Systems B.V. 2008 AA-744076-1156964030-A-492012

ENGLISH 4

ContentsSafety instructions 4Product description 6Control panel 6Programmes 6Options 7Before first use 8Daily use 10Hints and tips 11Car

Electrical connectionWarning! Risk of fire and electricalshock.• The appliance must be earthed.• Make sure that the electrical informationon the ratin

Product description21234986751Lower spray arm2Filters3Rating plate4Rinse aid dispenser5Detergent dispenser6Salt container7Water hardness dial8Upper sp

Programme1)Degree of soilType of loadProgrammephasesDuration(min)Energy(kWh)Water(l) 2)Normal soilCrockery andcutleryPrewashWash 50 °CRinsesDry130 - 1

Before first use1. Make sure that the set level of the watersoftener agrees with the water hardnessin your area. If not, adjust the watersoftener. Con

Electronic adjustment1. Press the on/off button to activate theappliance.2. If necessary, do the Reset function.3. Press and hold Program until the pr