IKEA LAGAN User Manual download pdf (Page 6)

• It is advisable to wait at least four hours

before connecting the appliance to allow

the oil to flow back in the compressor.

• Adequate air circulation should be

around the appliance, lacking this leads

to overheating. To achieve sufficient ven-

tilation follow the instructions relevant to

installation.

• Wherever possible the back of the prod-

uct should be against a wall to avoid

touching or catching warm parts (com-

pressor, condenser) to prevent possible

burn.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is accessi-

ble after the installation of the appliance.

Service

• Any electrical work required to do the

servicing of the appliance should be car-

ried out by a qualified electrician or com-

petent person.

• This product must be serviced by the Af-

ter Sales Service, and only genuine spare

parts must be used. The service numbers

are listed in the Service information.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei-

ther its refrigerant circuit or insulation mate-

rials. The appliance shall not be discarded

together with the urban refuse and rubbish.

The insulation foam contains flammable

gases: the appliance shall be disposed ac-

cording to the applicable regulations to ob-

tain from your local authorities. Avoid dam-

aging the cooling unit, especially at the rear

near the heat exchanger. The materials

used on this appliance marked by the sym-

bol

are recyclable.

Operation

Switching on

Insert the plug into the wall socket.

Turn the temperature regulator clockwise to

a medium setting.

Switching off

To turn off the appliance, turn the tempera-

ture regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as fol-

lows:

• turn the temperature regulator toward

lower settings to obtain the minimum

coldness.

• turn the temperature regulator toward

higher settings to obtain the maximum

coldness.

A medium setting is generally the most

suitable.

However, the exact setting should be chos-

en keeping in mind that the temperature in-

side the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

ENGLISH 6

1 2 3 4 5 6 7 8 9 10 11 ... 67 68

Comments to this Manuals

No comments